1. remove the four-wheel positioning sensor (fixture), remove the tire;
2. the magnetic level meter carefully sucked on the side of the brake disc;
3.adjust the level to zero;
4.install the required positioning special parts;
5. Use a special tool to adjust the positioning part to the desired measurement angle with the aid of the magnetic level indicator.
6.re-test with the locator if you find a little deviation, just fine-tune the car can be. (Generally a little deviation will not cause positioning failure)
1* Magnetic Gauge ToolMeasures the camber and caster angle on the wheel hub or brake disc.
Has a simple leveling adjustment from -5 degrees to 5 degrees.
Built-in powerful magnet. Easy to read and convenient to operate.
The third generation of improved precision.
Use this simple level to restore a vehicle’s camber setting after strut repair or installation.